notes: chip material gainn tolerance is 0.25mm (.010") unless otherwise specified. protruded resin under flange is 1.0mm (.04") max. manufacture date shall not be older than 26 weeks (6 months). leads to be solderable and capable of meeting the solderability requirements of mil-std-202, method 208. lead spacing is measured where leads emerge from the package. 4. 6. 5. 1. 3. 2. all dims are in millimeters (inches). electrostatic devices sensitive water clear warm white lens color emission color for handling- observe precautions written consent of angles 0,30' for any purpose without the prior express this document contains proprietary it may not be copied, used or disclosed -proprietary- .xx .025 .xxx .010 fract. 1/32 information of chk by scale l200-0ww-40d jg 8z410 title dwg no ident no. tolerance per ansi-y14.5 (unless otherwise stated) ledtronics, inc. ledtronics, inc. tm tm dwg by dsdc311 code sheet qa 2:1 mnfg 1 of 3 06-16-03 customer date attention ltr a appd date revision 12-09-05 rm tm 23105 kashiwa court torrance, ca 90505 r
continuous forward current body] [4mm (.157 m e t perature lead soldering ) from 50c perature range mperature range electrostatic discharge (esd) e t operating orage st e t m oltage derating linear from reverse v eter (1/10 duty cycle, 0.1ms pulse absolute maximum ratings at ta 25c peak forward current power dissipation param dt i w h) ma 30 260c for 5 seconds ma/c -40c to +100c -40c to +80c 150 v 0.4 5 v 100 120 ma mw max. unit luminous intensity is measured with a light sensor and filter combination that approximates is the off-axis at which the luminous intensity is half the axial luminous intensity. notes: the cie eye-response curve. 2. 1. lower right t color rank radiant intensity forward v reverse current viewing angle bin c bin d lumens scp --- --- --- lower left 1/2 1/2 0.27 0.30 x ltage o i r v f 2 --- 0.29 0.33 y 0.30 0.33 x --- --- --- 2.8 45 luminous intensity parameter rical optical characteristics at el ect symbol i v min. upper left =20ma =5v (note upper right y coordinates) --- 0.27 0.31 y 0.28 0.30 bin limits (cie1931x, x --- 3.5 50 100 --- --- 4.0 55 uw/sr 0.24 0.27 y 0.25 0.27 x ua --- --- v deg v r i f --- 0.26 0.29 y --- --- 2) =20ma condition =25c a 2500 yp. t 3000 max. m unit d c t f i st e (note 1) --- --- --- 2000 revision a ltr 12-09-05 date appd qa l200-0ww-40d for any purpose without the prior express ledtronics, inc. tolerance per ansi-y14.5 (unless otherwise stated) written consent of .xxx .010 fract. 1/32 .xx .025 angles 0,30' ident no. dsdc311-a tm 8z410 code dwg no rm dwg by scale chk by nts -proprietary- ledtronics, inc. this document contains proprietary it may not be copied, used or disclosed information of tm title customer 12-09-05 3 mnfg sheet 2 of date rm tm 23105 kashiwa court torrance, ca 90505 r
(unless otherwise stated) tolerance per ansi-y14.5 for any purpose without the prior express information of it may not be copied, used or disclosed this document contains proprietary angles 0,30' .xx .025 fract. 1/32 .xxx .010 written consent of ledtronics, inc. -proprietary- ledtronics, inc. tm tm l200-0ww-40d chk by rm 8z410 dsdc311-b ident no. dwg no code title dwg by nts scale qa sheet 3 mnfg of 3 12-09-05 customer date ltr a revision appd date 12-09-05 rm typical electrical / optical characteristics curves (25c ambient temperature unless otherwise noted) 60 90 30 forward current vs. derating curve 0 10 20 30 40 50 60 0 1 0 2 0405060700 890 0.25 0.26 0.27 0.28 0.24 0.25 0.26 0.27 0.28 0.29 x y 10m a 20m a 30m a forward current vs. chromaticity coordinates spectral radiance 00 0 2 0 4 06 08 1 0 3 80 42 0 460 5 00 54 0 580 6 20 660 700 7 40 780 wavelength (nm) 0 3 forward current vs. forward voltage 0 5 10 15 20 25 30 2 .5 2 .7 5 3.0 3.25 3.5 3.75 -60 -90 -30 0 relative luminous intensity vs. forward current 0 1 2 0 5 0152025 30 35 forward current if (ma) relative intensity (lop@20ma=1) 40m a 5m a 1ma t a = 25c cie 1931 chromaticity diagram c d 0.40 0.35 0.30 0.25 0.20 0.15 0.15 0.20 0.25 0.30 0.35 0.40 forward current if (ma) forward voltage vf (v) forward current if (ma) derating curve ta (c) beam pattern rela 6 0. 1.0 0. .4 8 60. 1.0 8 0. 0.2 0. 0.4 2 0 x y (lo inte tive nsit a p @m =1) normalized response x y tm 23105 kashiwa court torrance, ca 90505 r
|
